Aderência de revestimento de argamassa em bloco de concreto celular autoclavado
Nenhuma Miniatura disponível
Data
2012-05-14
Autores
Pagani, Angelo
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal do Espírito Santo
Resumo
This study aims at deepening investigations on adherence of mortar coats to autoclaved aerated concrete block.Among the materials used for sealing, autoclaved aerated concrete block is the one with the lowest thermal transmittance rate and lowest density, which qualifies it to be employed and also lead to reduction in costs of building structures. We investigated characteristics of autoclaved aerated concrete blocks such as apparent dry density, compressive strength, water initial and total absorption, and substrate adherence strength. Although it is a laboratorial test, we adopted solutions that can be used in the construction site, such as water spraywashing the substrate to eliminate dust that can compromise adherence; wetting coat mortar with water 12 hours after curing begins so as to avoid early evaporation of water; and wetting substrate before applying coat mortar. Fresh state mortar consistency, water retention, exudation, mass density and air content were investigated. For hardened mortars, mass density, bending tensile strength, compressive strength, wicking and wicking coefficient were assessed. In its fixed state, substrate was assessed for water absorption through pipe method and pull-off adherence strength. Study mortar mixes had variations in each of their components (cement, lime and sand) and mixing water was constant in relation to the amount of sand, with a small variation in the consistency rate. Test results showed that pull-off adherence strength that autoclaved aerated concrete blocks can stand is higher than those set by coating adherence standards, and that washing and wetting treatments of autoclaved aerated concrete blocks improve adherence of mortars to substrates.
Descrição
Palavras-chave
Argamassa , Concreto celular autoclavado , Aderência de revestimento
Citação
PAGANI, Angelo. Aderência de revestimento de argamassa em bloco de concreto celular autoclavado. 2012. Dissertação (Mestrado em Engenharia Civill) - Universidade Federal do Espírito Santo, Centro Tecnológico, Vitória, 2012.